The pcnet32 driver was not correctly enabling MII autonegotiation after booting when ppc firmware forced the speed/duplex mode of the chip. After several conversations with AMD this patch corrects the problem. Signed-off-by: Don Fry --- linux-2.4.27/drivers/net/home.pcnet32.c Mon Aug 9 15:42:04 2004 +++ linux-2.4.27/drivers/net/pcnet32.c Mon Aug 9 15:42:09 2004 @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30g" -#define DRV_RELDATE "06.22.2004" +#define DRV_VERSION "1.30h" +#define DRV_RELDATE "06.24.2004" #define PFX DRV_NAME ": " static const char *version = @@ -253,6 +253,7 @@ static int homepna[MAX_UNITS]; * and Brian Murphy . * v1.30g 22 Jun 2004 Patrick Simmons added option * homepna for selecting HomePNA mode for PCNet/Home 79C978. + * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. */ @@ -1421,9 +1422,13 @@ pcnet32_open(struct net_device *dev) val |= 0x10; lp->a.write_csr (ioaddr, 124, val); + /* 24 Jun 2004 according AMD, in order to change the PHY, + * DANAS (or DISPM for 79C976) must be set; then select the speed, + * duplex, and/or enable auto negotiation, and clear DANAS */ if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) { + lp->a.write_bcr(ioaddr, 32, lp->a.read_bcr(ioaddr, 32) | 0x0080); /* disable Auto Negotiation, set 10Mpbs, HD */ - val = lp->a.read_bcr (ioaddr, 32) & ~0x38; + val = lp->a.read_bcr(ioaddr, 32) & ~0xb8; if (lp->options & PCNET32_PORT_FD) val |= 0x10; if (lp->options & PCNET32_PORT_100) @@ -1431,6 +1436,7 @@ pcnet32_open(struct net_device *dev) lp->a.write_bcr (ioaddr, 32, val); } else { if (lp->options & PCNET32_PORT_ASEL) { + lp->a.write_bcr(ioaddr, 32, lp->a.read_bcr(ioaddr, 32) | 0x0080); /* enable auto negotiate, setup, disable fd */ val = lp->a.read_bcr(ioaddr, 32) & ~0x98; val |= 0x20; -- Don Fry brazilnut@us.ibm.com