diff -urN linux-2.5.6/drivers/ide/amd74xx.c linux-2.5.6-amdide/drivers/ide/amd74xx.c --- linux-2.5.6/drivers/ide/amd74xx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-amdide/drivers/ide/amd74xx.c Mon Mar 11 16:02:05 2002 @@ -1,485 +1,451 @@ /* - * linux/drivers/ide/amd74xx.c Version 0.05 June 9, 2000 + * $Id: amd74xx.c,v 2.7 2002/09/01 17:37:00 vojtech Exp $ * - * Copyright (C) 1999-2000 Andre Hedrick - * May be copied or modified under the terms of the GNU General Public License + * Copyright (c) 2000-2002 Vojtech Pavlik * + * Based on the work of: + * Andre Hedrick + */ + +/* + * AMD 755/756/766/8111 IDE driver for Linux. + * + * UDMA66 and higher modes are autoenabled only in case the BIOS has detected a + * 80 wire cable. To ignore the BIOS data and assume the cable is present, use + * 'ide0=ata66' or 'ide1=ata66' on the kernel command line. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include -#include #include -#include -#include -#include #include #include -#include - -#include -#include #include +#include #include - #include -#include -#include "ide_modes.h" +#include "ide-timing.h" + +#define AMD_IDE_ENABLE 0x40 +#define AMD_IDE_CONFIG 0x41 +#define AMD_CABLE_DETECT 0x42 +#define AMD_DRIVE_TIMING 0x48 +#define AMD_8BIT_TIMING 0x4e +#define AMD_ADDRESS_SETUP 0x4c +#define AMD_UDMA_TIMING 0x50 + +#define AMD_UDMA 0x07 +#define AMD_UDMA_33 0x01 +#define AMD_UDMA_66 0x02 +#define AMD_UDMA_100 0x03 +#define AMD_BAD_SWDMA 0x08 +#define AMD_BAD_FIFO 0x10 -#define DISPLAY_VIPER_TIMINGS +/* + * AMD SouthBridge chips. + */ + +static struct amd_ide_chip { + char *name; + unsigned short id; + unsigned char rev; + unsigned char flags; +} amd_ide_chips[] = { + { "8111", PCI_DEVICE_ID_AMD_8111_IDE, 0x00, AMD_UDMA_100 }, + { "768 Opus", PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, AMD_UDMA_100 }, + { "766 Viper", PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, AMD_UDMA_100 | AMD_BAD_FIFO }, + { "756/c4+ Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, AMD_UDMA_66 }, + { "756 Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, AMD_UDMA_66 | AMD_BAD_SWDMA }, + { "755 Cobra", PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, AMD_UDMA_33 | AMD_BAD_SWDMA }, + { NULL } +}; + +static struct amd_ide_chip *amd_config; +static unsigned char amd_enabled; +static unsigned int amd_80w; +static unsigned int amd_clock; + +static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3 }; +static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 1 }; +static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100" }; + +/* + * AMD /proc entry. + */ + +#ifdef CONFIG_PROC_FS -#if defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS) #include #include -static int amd74xx_get_info(char *, char **, off_t, int); -extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */ +byte amd74xx_proc; +int amd_base; static struct pci_dev *bmide_dev; +extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */ -static int amd74xx_get_info (char *buffer, char **addr, off_t offset, int count) -{ +#define amd_print(format, arg...) p += sprintf(p, format "\n" , ## arg) +#define amd_print_drive(name, format, arg...)\ + p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); + +static int amd_get_info(char *buffer, char **addr, off_t offset, int count) +{ + int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], + uen[4], udma[4], active8b[4], recover8b[4]; + struct pci_dev *dev = bmide_dev; + unsigned int v, u, i; + unsigned short c, w; + unsigned char t; char *p = buffer; - u32 bibma = pci_resource_start(bmide_dev, 4); - u8 c0 = 0, c1 = 0; - /* - * at that point bibma+0x2 et bibma+0xa are byte registers - * to investigate: - */ - c0 = inb_p((unsigned short)bibma + 0x02); - c1 = inb_p((unsigned short)bibma + 0x0a); - - p += sprintf(p, "\n AMD %04X VIPER Chipset.\n", bmide_dev->device); - p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n"); - p += sprintf(p, " %sabled %sabled\n", - (c0&0x80) ? "dis" : " en", - (c1&0x80) ? "dis" : " en"); - p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n"); - p += sprintf(p, "DMA enabled: %s %s %s %s\n", - (c0&0x20) ? "yes" : "no ", (c0&0x40) ? "yes" : "no ", - (c1&0x20) ? "yes" : "no ", (c1&0x40) ? "yes" : "no " ); - p += sprintf(p, "UDMA\n"); - p += sprintf(p, "DMA\n"); - p += sprintf(p, "PIO\n"); + amd_print("----------AMD BusMastering IDE Configuration----------------"); - return p-buffer; /* => must be less than 4k! */ -} -#endif /* defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS) */ + amd_print("Driver Version: 2.7"); + amd_print("South Bridge: AMD-%s", amd_config->name); -byte amd74xx_proc = 0; + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + amd_print("Revision: IDE %#x", t); + amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]); -extern char *ide_xfer_verbose (byte xfer_rate); + amd_print("BM-DMA base: %#x", amd_base); + amd_print("PCI clock: %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10); + + amd_print("-----------------------Primary IDE-------Secondary IDE------"); -static unsigned int amd74xx_swdma_check (struct pci_dev *dev) -{ - unsigned int class_rev; + pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); + amd_print("Prefetch Buffer: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); + amd_print("Post Write Buffer: %10s%20s", (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); - if ((dev->device == PCI_DEVICE_ID_AMD_VIPER_7411) || - (dev->device == PCI_DEVICE_ID_AMD_VIPER_7441)) - return 0; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; - return ((int) (class_rev >= 7) ? 1 : 0); -} + pci_read_config_byte(dev, AMD_IDE_ENABLE, &t); + amd_print("Enabled: %10s%20s", (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); -static int amd74xx_swdma_error(ide_drive_t *drive) -{ - printk("%s: single-word DMA not support (revision < C4)\n", drive->name); - return 0; -} + c = inb(amd_base + 0x02) | (inb(amd_base + 0x0a) << 8); + amd_print("Simplex only: %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); -/* - * Here is where all the hard work goes to program the chipset. - * - */ -static int amd74xx_tune_chipset (ide_drive_t *drive, byte speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - int err = 0; - byte unit = (drive->select.b.unit & 0x01); -#ifdef CONFIG_BLK_DEV_IDEDMA - unsigned long dma_base = hwif->dma_base; -#endif /* CONFIG_BLK_DEV_IDEDMA */ - byte drive_pci = 0x00; - byte drive_pci2 = 0x00; - byte ultra_timing = 0x00; - byte dma_pio_timing = 0x00; - byte pio_timing = 0x00; - - switch (drive->dn) { - case 0: drive_pci = 0x53; drive_pci2 = 0x4b; break; - case 1: drive_pci = 0x52; drive_pci2 = 0x4a; break; - case 2: drive_pci = 0x51; drive_pci2 = 0x49; break; - case 3: drive_pci = 0x50; drive_pci2 = 0x48; break; - default: - return -1; - } - - pci_read_config_byte(dev, drive_pci, &ultra_timing); - pci_read_config_byte(dev, drive_pci2, &dma_pio_timing); - pci_read_config_byte(dev, 0x4c, &pio_timing); - -#ifdef DEBUG - printk("%s:%d: Speed 0x%02x UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x\n", - drive->name, drive->dn, speed, ultra_timing, dma_pio_timing, pio_timing); -#endif + amd_print("Cable Type: %10s%20s", (amd_80w & 1) ? "80w" : "40w", (amd_80w & 2) ? "80w" : "40w"); - ultra_timing &= ~0xC7; - dma_pio_timing &= ~0xFF; - pio_timing &= ~(0x03 << drive->dn); - -#ifdef DEBUG - printk("%s: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x\n", - drive->name, ultra_timing, dma_pio_timing, pio_timing); -#endif + if (!amd_clock) + return p - buffer; - switch(speed) { -#ifdef CONFIG_BLK_DEV_IDEDMA - case XFER_UDMA_7: - case XFER_UDMA_6: - speed = XFER_UDMA_5; - case XFER_UDMA_5: - ultra_timing |= 0x46; - dma_pio_timing |= 0x20; - break; - case XFER_UDMA_4: - ultra_timing |= 0x45; - dma_pio_timing |= 0x20; - break; - case XFER_UDMA_3: - ultra_timing |= 0x44; - dma_pio_timing |= 0x20; - break; - case XFER_UDMA_2: - ultra_timing |= 0x40; - dma_pio_timing |= 0x20; - break; - case XFER_UDMA_1: - ultra_timing |= 0x41; - dma_pio_timing |= 0x20; - break; - case XFER_UDMA_0: - ultra_timing |= 0x42; - dma_pio_timing |= 0x20; - break; - case XFER_MW_DMA_2: - dma_pio_timing |= 0x20; - break; - case XFER_MW_DMA_1: - dma_pio_timing |= 0x21; - break; - case XFER_MW_DMA_0: - dma_pio_timing |= 0x77; - break; - case XFER_SW_DMA_2: - if (!amd74xx_swdma_check(dev)) - return amd74xx_swdma_error(drive); - dma_pio_timing |= 0x42; - break; - case XFER_SW_DMA_1: - if (!amd74xx_swdma_check(dev)) - return amd74xx_swdma_error(drive); - dma_pio_timing |= 0x65; - break; - case XFER_SW_DMA_0: - if (!amd74xx_swdma_check(dev)) - return amd74xx_swdma_error(drive); - dma_pio_timing |= 0xA8; - break; -#endif /* CONFIG_BLK_DEV_IDEDMA */ - case XFER_PIO_4: - dma_pio_timing |= 0x20; - break; - case XFER_PIO_3: - dma_pio_timing |= 0x22; - break; - case XFER_PIO_2: - dma_pio_timing |= 0x42; - break; - case XFER_PIO_1: - dma_pio_timing |= 0x65; - break; - case XFER_PIO_0: - default: - dma_pio_timing |= 0xA8; - break; - } + amd_print("-------------------drive0----drive1----drive2----drive3-----"); - pio_timing |= (0x03 << drive->dn); + pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); + pci_read_config_dword(dev, AMD_DRIVE_TIMING, &v); + pci_read_config_word(dev, AMD_8BIT_TIMING, &w); + pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); - if (!drive->init_speed) - drive->init_speed = speed; + for (i = 0; i < 4; i++) { + setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; + recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; + active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; + active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; + recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; -#ifdef CONFIG_BLK_DEV_IDEDMA - pci_write_config_byte(dev, drive_pci, ultra_timing); -#endif /* CONFIG_BLK_DEV_IDEDMA */ - pci_write_config_byte(dev, drive_pci2, dma_pio_timing); - pci_write_config_byte(dev, 0x4c, pio_timing); + udma[i] = amd_udma2cyc[((u >> ((3 - i) << 3)) & 0x7)]; + uen[i] = ((u >> ((3 - i) << 3)) & 0x40) ? 1 : 0; + den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); + + if (den[i] && uen[i] && udma[i] == 1) { + speed[i] = amd_clock * 3; + cycle[i] = 666666 / amd_clock; + continue; + } + + speed[i] = 4 * amd_clock / ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2); + cycle[i] = 1000000 * ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2) / amd_clock / 2; + } + + amd_print_drive("Transfer Mode: ", "%10s", den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); + + amd_print_drive("Address Setup: ", "%8dns", 1000000 * setup[i] / amd_clock); + amd_print_drive("Cmd Active: ", "%8dns", 1000000 * active8b[i] / amd_clock); + amd_print_drive("Cmd Recovery: ", "%8dns", 1000000 * recover8b[i] / amd_clock); + amd_print_drive("Data Active: ", "%8dns", 1000000 * active[i] / amd_clock); + amd_print_drive("Data Recovery: ", "%8dns", 1000000 * recover[i] / amd_clock); + amd_print_drive("Cycle Time: ", "%8dns", cycle[i]); + amd_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 1000, speed[i] / 100 % 10); + + return p - buffer; /* hoping it is less than 4K... */ +} -#ifdef DEBUG - printk("%s: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x\n", - drive->name, ultra_timing, dma_pio_timing, pio_timing); #endif -#ifdef CONFIG_BLK_DEV_IDEDMA - if (speed > XFER_PIO_4) { - outb(inb(dma_base+2)|(1<<(5+unit)), dma_base+2); - } else { - outb(inb(dma_base+2) & ~(1<<(5+unit)), dma_base+2); +/* + * amd_set_speed() writes timing values to the chipset registers + */ + +static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing) +{ + unsigned char t; + + pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t); + + pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)), + ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + + pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn), + ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + + switch (amd_config->flags & AMD_UDMA) { + case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; + case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; + case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; + default: return; } -#endif /* CONFIG_BLK_DEV_IDEDMA */ - err = ide_config_drive_speed(drive, speed); - drive->current_speed = speed; - return (err); + pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t); } -static void config_chipset_for_pio (ide_drive_t *drive) +/* + * amd_set_drive() computes timing values configures the drive and + * the chipset to a desired transfer mode. It also can be called + * by upper layers. + */ + +static int amd_set_drive(ide_drive_t *drive, unsigned char speed) { - unsigned short eide_pio_timing[6] = {960, 480, 240, 180, 120, 90}; - unsigned short xfer_pio = drive->id->eide_pio_modes; - byte timing, speed, pio; - - pio = ide_get_best_pio_mode(drive, 255, 5, NULL); - - if (xfer_pio> 4) - xfer_pio = 0; - - if (drive->id->eide_pio_iordy > 0) { - for (xfer_pio = 5; - xfer_pio>0 && - drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio]; - xfer_pio--); - } else { - xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : - (drive->id->eide_pio_modes & 2) ? 0x04 : - (drive->id->eide_pio_modes & 1) ? 0x03 : - (drive->id->tPIO & 2) ? 0x02 : - (drive->id->tPIO & 1) ? 0x01 : xfer_pio; - } - - timing = (xfer_pio >= pio) ? xfer_pio : pio; - - switch(timing) { - case 4: speed = XFER_PIO_4;break; - case 3: speed = XFER_PIO_3;break; - case 2: speed = XFER_PIO_2;break; - case 1: speed = XFER_PIO_1;break; - default: - speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW; - break; + ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + struct ide_timing t, p; + int T, UT; + + if (speed != XFER_PIO_SLOW && speed != drive->current_speed) + if (ide_config_drive_speed(drive, speed)) + printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n", + drive->dn >> 1, drive->dn & 1); + + T = 1000000000 / amd_clock; + UT = T / MIN(MAX(amd_config->flags & AMD_UDMA, 1), 2); + + ide_timing_compute(drive, speed, &t, T, UT); + + if (peer->present) { + ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } - (void) amd74xx_tune_chipset(drive, speed); + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; + + amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + + if (!drive->init_speed) + drive->init_speed = speed; drive->current_speed = speed; + + return 0; } -static void amd74xx_tune_drive (ide_drive_t *drive, byte pio) +/* + * amd74xx_tune_drive() is a callback from upper layers for + * PIO-only tuning. + */ + +static void amd74xx_tune_drive(ide_drive_t *drive, unsigned char pio) { - byte speed; - switch(pio) { - case 4: speed = XFER_PIO_4;break; - case 3: speed = XFER_PIO_3;break; - case 2: speed = XFER_PIO_2;break; - case 1: speed = XFER_PIO_1;break; - default: speed = XFER_PIO_0;break; + if (!((amd_enabled >> HWIF(drive)->channel) & 1)) + return; + + if (pio == 255) { + amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + return; } - (void) amd74xx_tune_chipset(drive, speed); + + amd_set_drive(drive, XFER_PIO_0 + MIN(pio, 5)); } #ifdef CONFIG_BLK_DEV_IDEDMA + /* - * This allows the configuration of ide_pci chipset registers - * for cards that learn about the drive's UDMA, DMA, PIO capabilities - * after the drive is reported by the OS. + * amd74xx_dmaproc() is a callback from upper layers that can do + * a lot, but we use it for DMA/PIO tuning only, delegating everything + * else to the default ide_dmaproc(). */ -static int config_chipset_for_dma (ide_drive_t *drive) + +int amd74xx_dmaproc(ide_dma_action_t func, ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - struct hd_driveid *id = drive->id; - byte udma_66 = eighty_ninty_three(drive); - byte udma_100 = ((dev->device==PCI_DEVICE_ID_AMD_VIPER_7411)|| - (dev->device==PCI_DEVICE_ID_AMD_VIPER_7441)) ? 1 : 0; - byte speed = 0x00; - int rval; - - if ((id->dma_ultra & 0x0020) && (udma_66) && (udma_100)) { - speed = XFER_UDMA_5; - } else if ((id->dma_ultra & 0x0010) && (udma_66)) { - speed = XFER_UDMA_4; - } else if ((id->dma_ultra & 0x0008) && (udma_66)) { - speed = XFER_UDMA_3; - } else if (id->dma_ultra & 0x0004) { - speed = XFER_UDMA_2; - } else if (id->dma_ultra & 0x0002) { - speed = XFER_UDMA_1; - } else if (id->dma_ultra & 0x0001) { - speed = XFER_UDMA_0; - } else if (id->dma_mword & 0x0004) { - speed = XFER_MW_DMA_2; - } else if (id->dma_mword & 0x0002) { - speed = XFER_MW_DMA_1; - } else if (id->dma_mword & 0x0001) { - speed = XFER_MW_DMA_0; - } else { - return ((int) ide_dma_off_quietly); - } - - (void) amd74xx_tune_chipset(drive, speed); - - rval = (int)( ((id->dma_ultra >> 11) & 7) ? ide_dma_on : - ((id->dma_ultra >> 8) & 7) ? ide_dma_on : - ((id->dma_mword >> 8) & 7) ? ide_dma_on : - ide_dma_off_quietly); - return rval; + if (func == ide_dma_check) { + + short w80 = HWIF(drive)->udma_four; + + short speed = ide_find_best_mode(drive, + XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA | + ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) | + (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) | + (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0)); + + amd_set_drive(drive, speed); + + func = (HWIF(drive)->autodma && (speed & XFER_MODE) != XFER_PIO) + ? ide_dma_on : ide_dma_off_quietly; + } + + return ide_dmaproc(func, drive); } -static int config_drive_xfer_rate (ide_drive_t *drive) +#endif /* CONFIG_BLK_DEV_IDEDMA */ + +/* + * The initialization callback. Here we determine the IDE chip type + * and initialize its drive independent registers. + */ + +unsigned int __init pci_init_amd74xx(struct pci_dev *dev, const char *name) { - struct hd_driveid *id = drive->id; - ide_dma_action_t dma_func = ide_dma_on; + unsigned char t; + unsigned int u; + int i; - if (id && (id->capability & 1) && HWIF(drive)->autodma) { - /* Consult the list of known "bad" drives */ - if (ide_dmaproc(ide_dma_bad_drive, drive)) { - dma_func = ide_dma_off; - goto fast_ata_pio; - } - dma_func = ide_dma_off_quietly; - if (id->field_valid & 4) { - if (id->dma_ultra & 0x003F) { - /* Force if Capable UltraDMA */ - dma_func = config_chipset_for_dma(drive); - if ((id->field_valid & 2) && - (dma_func != ide_dma_on)) - goto try_dma_modes; - } - } else if (id->field_valid & 2) { -try_dma_modes: - if ((id->dma_mword & 0x0007) || - ((id->dma_1word & 0x007) && - (amd74xx_swdma_check(HWIF(drive)->pci_dev)))) { - /* Force if Capable regular DMA modes */ - dma_func = config_chipset_for_dma(drive); - if (dma_func != ide_dma_on) - goto no_dma_set; - } - - } else if (ide_dmaproc(ide_dma_good_drive, drive)) { - if (id->eide_dma_time > 150) { - goto no_dma_set; - } - /* Consult the list of known "good" drives */ - dma_func = config_chipset_for_dma(drive); - if (dma_func != ide_dma_on) - goto no_dma_set; - } else { - goto fast_ata_pio; +/* + * Find out what AMD IDE is this. + */ + + for (amd_config = amd_ide_chips; amd_config->id; amd_config++) { + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + if (dev->device == amd_config->id && t >= amd_config->rev) + break; } - } else if ((id->capability & 8) || (id->field_valid & 2)) { -fast_ata_pio: - dma_func = ide_dma_off_quietly; -no_dma_set: - config_chipset_for_pio(drive); + if (!amd_config->id) { + printk(KERN_WARNING "AMD_IDE: Unknown AMD IDE Chip, contact Vojtech Pavlik \n"); + return -ENODEV; } - return HWIF(drive)->dmaproc(dma_func, drive); -} /* - * amd74xx_dmaproc() initiates/aborts (U)DMA read/write operations on a drive. + * Check 80-wire cable presence. */ -int amd74xx_dmaproc (ide_dma_action_t func, ide_drive_t *drive) -{ - switch (func) { - case ide_dma_check: - return config_drive_xfer_rate(drive); - default: + switch (amd_config->flags & AMD_UDMA) { + + case AMD_UDMA_100: + pci_read_config_byte(dev, AMD_CABLE_DETECT, &t); + amd_80w = ((u & 0x3) ? 1 : 0) | ((u & 0xc) ? 2 : 0); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { + printk(KERN_WARNING "AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.\n"); + amd_80w |= (1 << (1 - (i >> 4))); + } + break; + + case AMD_UDMA_66: + pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); + for (i = 24; i >= 0; i -= 8) + if ((u >> i) & 4) + amd_80w |= (1 << (1 - (i >> 4))); break; } - return ide_dmaproc(func, drive); /* use standard DMA stuff */ -} -#endif /* CONFIG_BLK_DEV_IDEDMA */ -unsigned int __init pci_init_amd74xx(struct pci_dev *dev) -{ - unsigned long fixdma_base = pci_resource_start(dev, 4); + pci_read_config_dword(dev, AMD_IDE_ENABLE, &u); + amd_enabled = ((u & 1) ? 2 : 0) | ((u & 2) ? 1 : 0); -#ifdef CONFIG_BLK_DEV_IDEDMA - if (!amd74xx_swdma_check(dev)) - printk("%s: disabling single-word DMA support (revision < C4)\n", dev->name); -#endif /* CONFIG_BLK_DEV_IDEDMA */ +/* + * Take care of prefetch & postwrite. + */ - if (!fixdma_base) { - /* - * - */ - } else { - /* - * enable DMA capable bit, and "not" simplex only - */ - outb(inb(fixdma_base+2) & 0x60, fixdma_base+2); + pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); + pci_write_config_byte(dev, AMD_IDE_CONFIG, + (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0)); - if (inb(fixdma_base+2) & 0x80) - printk("%s: simplex device: DMA will fail!!\n", dev->name); +/* + * Determine the system bus clock. + */ + + amd_clock = system_bus_speed * 1000; + + switch (amd_clock) { + case 33000: amd_clock = 33333; break; + case 37000: amd_clock = 37500; break; + case 41000: amd_clock = 41666; break; } -#if defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS) + + if (amd_clock < 20000 || amd_clock > 50000) { + printk(KERN_WARNING "AMD_IDE: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", amd_clock); + printk(KERN_WARNING "AMD_IDE: Use ide0=ata66 if you want to assume 80-wire cable\n"); + amd_clock = 33333; + } + +/* + * Print the boot message. + */ + + pci_read_config_byte(dev, PCI_REVISION_ID, &t); + printk(KERN_INFO "AMD_IDE: AMD-%s (rev %02x) IDE %s controller on pci%s\n", + amd_config->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name); + +/* + * Register /proc/ide/amd74xx entry + */ + +#ifdef CONFIG_PROC_FS if (!amd74xx_proc) { - amd74xx_proc = 1; + amd_base = pci_resource_start(dev, 4); bmide_dev = dev; - amd74xx_display_info = &amd74xx_get_info; + amd74xx_display_info = &amd_get_info; + amd74xx_proc = 1; } -#endif /* DISPLAY_VIPER_TIMINGS && CONFIG_PROC_FS */ +#endif return 0; } -unsigned int __init ata66_amd74xx (ide_hwif_t *hwif) +unsigned int __init ata66_amd74xx(ide_hwif_t *hwif) { -#ifdef CONFIG_AMD74XX_OVERRIDE - byte ata66 = 1; -#else - byte ata66 = 0; -#endif /* CONFIG_AMD74XX_OVERRIDE */ - -#if 0 - pci_read_config_byte(hwif->pci_dev, 0x48, &ata66); - return ((ata66 & 0x02) ? 0 : 1); -#endif - return ata66; + return ((amd_enabled & amd_80w) >> hwif->channel) & 1; } -void __init ide_init_amd74xx (ide_hwif_t *hwif) +void __init ide_init_amd74xx(ide_hwif_t *hwif) { - hwif->tuneproc = &amd74xx_tune_drive; - hwif->speedproc = &amd74xx_tune_chipset; + int i; - hwif->highmem = 1; - -#ifndef CONFIG_BLK_DEV_IDEDMA - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; + hwif->tuneproc = &amd74xx_tune_drive; + hwif->speedproc = &amd_set_drive; hwif->autodma = 0; - return; -#else + for (i = 0; i < 2; i++) { + hwif->drives[i].io_32bit = 1; + hwif->drives[i].unmask = 1; + hwif->drives[i].autotune = 1; + hwif->drives[i].dn = hwif->channel * 2 + i; + } + +#ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_base) { + hwif->highmem = 1; hwif->dmaproc = &amd74xx_dmaproc; +#ifdef CONFIG_IDEDMA_AUTO if (!noautodma) hwif->autodma = 1; - } else { - hwif->autodma = 0; - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; +#endif } #endif /* CONFIG_BLK_DEV_IDEDMA */ } -void __init ide_dmacapable_amd74xx (ide_hwif_t *hwif, unsigned long dmabase) +/* + * We allow the BM-DMA driver only work on enabled interfaces. + */ + +void __init ide_dmacapable_amd74xx(ide_hwif_t *hwif, unsigned long dmabase) { - ide_setup_dma(hwif, dmabase, 8); + if ((amd_enabled >> hwif->channel) & 1) + ide_setup_dma(hwif, dmabase, 8); } diff -urN linux-2.5.6/drivers/ide/ide-pci.c linux-2.5.6-amdide/drivers/ide/ide-pci.c --- linux-2.5.6/drivers/ide/ide-pci.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-amdide/drivers/ide/ide-pci.c Mon Mar 11 15:57:33 2002 @@ -284,10 +284,11 @@ {PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE, pci_init_cs5530, NULL, ide_init_cs5530, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_DMA }, #endif #ifdef CONFIG_BLK_DEV_AMD74XX - {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, NULL, NULL, NULL, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, + {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, - {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7441, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, + {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, + {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 }, #endif #ifdef CONFIG_BLK_DEV_PDC_ADMA {PCI_VENDOR_ID_PDC, PCI_DEVICE_ID_PDC_1841, pci_init_pdcadma, ata66_pdcadma, ide_init_pdcadma, ide_dmacapable_pdcadma, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0, ATA_F_NODMA }, diff -urN linux-2.5.6/include/linux/pci_ids.h linux-2.5.6-amdide/include/linux/pci_ids.h --- linux-2.5.6/include/linux/pci_ids.h Mon Mar 11 08:46:23 2002 +++ linux-2.5.6-amdide/include/linux/pci_ids.h Mon Mar 11 15:48:59 2002 @@ -383,11 +383,14 @@ #define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 #define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 #define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414 -#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440 -#define PCI_DEVICE_ID_AMD_VIPER_7441 0x7441 -#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443 -#define PCI_DEVICE_ID_AMD_VIPER_7448 0x7448 -#define PCI_DEVICE_ID_AMD_VIPER_7449 0x7449 +#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440 +#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 +#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 +#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448 +#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449 +#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462 +#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 +#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000